Vantage Rear Shock
All components
.
.
Upper perch upper damper
Rubber damper on top of perch
.
.
Not sure if this top cap can be removed from shock body. Holding perch hostage.
Perch sits on circlip
.
.
.
You can see a small line going around the shock body here. The bottom of the shock body is slightly larger diameter than the rest, so the perch cannot be removed from the bottom.
. .
. .
.
.
.
.
.
.
.
ID of bottom of spring
ID of top of spring
.
OD of base of threaded section
OD of shock tube
OD of threaded section
OD of body cap (haven't tried to remove using tools, can't be done by hand)
.
.
.
OD of larger diameter bottom portion of shock body
OD of main shock body
.
.
.
.
.
OD of circlip installed
Fully extended length of piston from where washer lands to body
Top of threaded section to end of piston
Lowest point of rubber perch cover to top of body
Highest point of rubber perch cover to top of body
Lowest point of perch to top of body
Highest point of perch to top of body
Bottom of circlip to center of lower bolt. Circlip thickness approximately 1.5 mm
View of top of perch
.
.
.
.
.
.
.
.
.
Diameter of opening in top hat
.
.
.
.