Pre-Sharpened Ice Racing Studs (Bolts) - 100 pack

$99.99
sold out

Just add tires and windshield adhesive and go racing.

Add To Cart

Just add tires and windshield adhesive and go racing.

Just add tires and windshield adhesive and go racing.

These bolts are meant for use with many ice racing organizations in their "spec stud” class. Specs:

  • M8x1.25 bolts (metric equivalent to 5/16”)

  • 1.25” long

  • Class 10.9 (metric equivalent to grade 8)

  • Each bolt comes with a washer and nylon insert locknut for the outside of the tire.

  • Flange head bolt doesn’t require a washer on the inside.


  • Figure out how many studs you’re allowed according to your organization’s rules

  • Pick out a tire with well-defined tread blocks; it’ll make creating a pattern easier

  • Drill 3/16” holes from outside in for each stud

  • Put a dab of urethane windshield adhesive on the end of a stud and use a drill/impact to push it through

  • Put a small bead of adhesive all around the outside of the bolt where it comes out of the tire

  • Add washer and tighten nut. The washer should squish the tread pretty well on the outside; it should feel pretty darn tight


There are a lot of factors to consider when choosing a tire for ice racing. We believe the ideal tire has a stiff sidewall, has minimal tread to not eat up bolt length, and isn’t dry rotting. Something less than 5 years old is ideal. Stay away from racing slicks and non-DOT tires, as they will crack at cold temperatures. Ask us how we know…

BMW E46 (AWD) 3 Series Driveshaft Center Support Bearing Carrier Upgrade (BMW17A0)
from $249.99
Driveshaft Carrier Spare Hardware Sets
from $29.99
BMW E36 and E46 (RWD) 3 Series Driveshaft Center Support Bearing Carrier Upgrade (BMW04A0)
from $249.99
1g DSM Mitsubishi Eclipse/Eagle Talon, 6g Galant VR-4 Driveshaft Center Support Bearing Carrier Upgrade (DSM05A0/1)
from $279.99
Ford S550 Mustang Driveshaft Center Support Bearing Carrier Upgrade (FRD02A0/FRD03A0)
from $299.99